configure infiniband connection(rdma) for 2 mics

Hi, I'm trying to set up infiniband connection between host and mic, mic and mic. Host is showing this on ifconfig:

mic0:ib: flags=67<UP,BROADCAST,RUNNING>  mtu 64512
        inet 192.0.2.100  netmask 255.255.255.0  broadcast 0.0.0.0
        ether 4c:79:ba:20:06:63  txqueuelen 1000  (Ethernet)

and two: mic0 and mic1 interfaces.

I have two coprocessors installed.  I can run ib_read_bw between host and mic0, but not host and mic1 or mic0 and mic1.  Getting error:  

Received 10 times ADDR_ERROR
Unable to perform rdma_client function.

ifconfig from mic0: 
mic0:ib   Link encap:Ethernet  HWaddr 4C:79:BA:20:06:62  
          inet addr:192.0.2.101  Bcast:0.0.0.0  Mask:255.255.255.0
          UP BROADCAST RUNNING  MTU:64512  Metric:1
iconfig from mic1:
mic0:ib   Link encap:Ethernet  HWaddr 4C:79:BA:20:06:9C  
          inet addr:192.0.2.102  Bcast:0.0.0.0  Mask:255.255.255.0
          UP BROADCAST RUNNING  MTU:64512  Metric:1

Also, there is no ping between host and mic1, mic1 and mic0.

Do I have to do some configuration setup?

Thanks,
Azamat