Quantcast
Channel: Intel® Many Integrated Core Architecture
Viewing all articles
Browse latest Browse all 1347

Expected files seem to be missing

$
0
0

Hi,

We are just getting started with mpss and I was trying to follow the instructions found at http://software.intel.com/sites/default/files/article/373934/system-admi... specifically the section on making an nfs export available to a coprocessor.   "Implementation using CommonDir" page 23.

The documentation implies that /opt/intel/mic/filesystem/common should exist.  It didn't so I created it and a directory etc under this.  The document then wanted me to copy the existing fstab from mic0 to another location.  Which makes perfect sense.  But the problem is that for both of our co-processors the only skeleton file that seems to be available is /opt/intel/mic/filesystem/mic{0|1}/etc/sysconfig/network/ifcfg-mic0. 

Have I missed something fundamental in our installation ?  Any help would be appreciated.

I have seen that when runnig miccheck it complains that the running flash version is to low so I have been able to run

micflash -update -smcbootloader -device all and it appears to have completed successfully.  I can not yet reboot the host to confirm this.

 

The system is CentOS 6.5 mpss 3.1.2

# service mpss status
mpss is running

]# miccheck
MicCheck 3.1.2-r1
Copyright 2013 Intel Corporation All Rights Reserved

Executing default tests for host
  Test 0: Check number of devices the OS sees in the system ... pass
  Test 1: Check mic driver is loaded ... pass
  Test 2: Check number of devices driver sees in the system ... pass
  Test 3: Check mpssd daemon is running ... pass
Executing default tests for device: 0
  Test 4 (mic0): Check device is in online state and its postcode is FF ... pass
  Test 5 (mic0): Check ras daemon is available in device ... pass
  Test 6 (mic0): Check running flash version is correct ... fail
    device flash version does not match, should be '390', it is '386'.
Executing default tests for device: 1
  Test 7 (mic1): Check device is in online state and its postcode is FF ... pass
  Test 8 (mic1): Check ras daemon is available in device ... pass
  Test 9 (mic1): Check running flash version is correct ... fail
    device flash version does not match, should be '390', it is '386'.

Status: FAIL
Failure: A device test failed

#  micinfo
MicInfo Utility Log

Created Thu Mar 13 12:15:23 2014

    System Info
        HOST OS            : Linux
        OS Version        : 2.6.32-431.5.1.el6.x86_64
        Driver Version        : 3.1.2-1
        MPSS Version        : 3.1.2
        Host Physical Memory    : 132110 MB

Device No: 0, Device Name: mic0

    Version
        Flash Version          : 2.1.02.0386
        SMC Firmware Version     : 1.16.5078
        SMC Boot Loader Version     : 1.8.4326
        uOS Version          : 2.6.38.8+mpss3.1.2
        Device Serial Number      : ADKC34200076

    Board
        Vendor ID          : 0x8086
        Device ID          : 0x2250
        Subsystem ID          : 0x2500
        Coprocessor Stepping ID     : 3
        PCIe Width          : x16
        PCIe Speed          : 5 GT/s
        PCIe Max payload size     : 256 bytes
        PCIe Max read req size     : 512 bytes
        Coprocessor Model     : 0x01
        Coprocessor Model Ext     : 0x00
        Coprocessor Type     : 0x00
        Coprocessor Family     : 0x0b
        Coprocessor Family Ext     : 0x00
        Coprocessor Stepping      : B1
        Board SKU          : B1PRQ-5110P/5120D
        ECC Mode          : Enabled
        SMC HW Revision      : Product 225W Passive CS

    Cores
        Total No of Active Cores : 60
        Voltage          : 1010000 uV
        Frequency         : 1052631 kHz

    Thermal
        Fan Speed Control      : N/A
        Fan RPM          : N/A
        Fan PWM          : N/A
        Die Temp         : 34 C

    GDDR
        GDDR Vendor         : Elpida
        GDDR Version         : 0x1
        GDDR Density         : 2048 Mb
        GDDR Size         : 7936 MB
        GDDR Technology         : GDDR5
        GDDR Speed         : 5.000000 GT/s
        GDDR Frequency         : 2500000 kHz
        GDDR Voltage         : 1501000 uV

Device No: 1, Device Name: mic1

    Version
        Flash Version          : 2.1.02.0386
        SMC Firmware Version     : 1.16.5078
        SMC Boot Loader Version     : 1.8.4326
        uOS Version          : 2.6.38.8+mpss3.1.2
        Device Serial Number      : ADKC34200071

    Board
        Vendor ID          : 0x8086
        Device ID          : 0x2250
        Subsystem ID          : 0x2500
        Coprocessor Stepping ID     : 3
        PCIe Width          : x16
        PCIe Speed          : 5 GT/s
        PCIe Max payload size     : 256 bytes
        PCIe Max read req size     : 512 bytes
        Coprocessor Model     : 0x01
        Coprocessor Model Ext     : 0x00
        Coprocessor Type     : 0x00
        Coprocessor Family     : 0x0b
        Coprocessor Family Ext     : 0x00
        Coprocessor Stepping      : B1
        Board SKU          : B1PRQ-5110P/5120D
        ECC Mode          : Enabled
        SMC HW Revision      : Product 225W Passive CS

    Cores
        Total No of Active Cores : 60
        Voltage          : 968000 uV
        Frequency         : 1052631 kHz

    Thermal
        Fan Speed Control      : N/A
        Fan RPM          : N/A
        Fan PWM          : N/A
        Die Temp         : 42 C

    GDDR
        GDDR Vendor         : Elpida
        GDDR Version         : 0x1
        GDDR Density         : 2048 Mb
        GDDR Size         : 7936 MB
        GDDR Technology         : GDDR5
        GDDR Speed         : 5.000000 GT/s
        GDDR Frequency         : 2500000 kHz
        GDDR Voltage         : 1501000 uV

 

 

 

 


Viewing all articles
Browse latest Browse all 1347

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>