Hi,
I have installed MPSS-3.4.5 on CentOS 7.1. Now I'm trying to install OFED-3.5.2-MIC following the instruction in https://software.intel.com/en-us/blogs/2014/09/23/working-with-mellanox-.... I follow the instruction in section 2.2 and 3 of the document. Then I run the command "ibv_devinfo" on the host. Here is the output:
hca_id: scif0
transport: iWARP (1)
fw_ver: 0.0.1
node_guid: 4c79:baff:fe66:03e9
sys_image_guid: 4c79:baff:fe66:03e9
vendor_id: 0x8086
vendor_part_id: 0
hw_ver: 0x1
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 1
port_lid: 1000
port_lmc: 0x00
link_layer: Ethernet
hca_id: mlx5_0
transport: InfiniBand (0)
fw_ver: 10.10.5020
node_guid: f452:1403:0002:4210
sys_image_guid: f452:1403:0002:4210
vendor_id: 0x02c9
vendor_part_id: 4113
hw_ver: 0x0
board_id: MT_1210110019
phys_port_cnt: 2
port: 1
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 65535
port_lmc: 0x00
link_layer: InfiniBand
port: 2
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 65535
port_lmc: 0x00
link_layer: InfiniBand
hca_id: mlx4_0
transport: InfiniBand (0)
fw_ver: 2.33.5000
node_guid: f452:1403:0001:b880
sys_image_guid: f452:1403:0001:b883
vendor_id: 0x02c9
vendor_part_id: 4099
hw_ver: 0x0
board_id: MT_1090120019
phys_port_cnt: 2
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 1
port_lid: 9
port_lmc: 0x00
link_layer: InfiniBand
port: 2
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: InfiniBand
The problem is when I run the command "ibv_devinfo" on the mic, the output is as follows, showing that no infiniband device is installed on the mic.
"Failed to get IB devices list: Function not implemented".
Please let me know if you have any idea what the problem might be.
Thanks,
Mahdieh